POWER8workshop PROcase & Li-Ion charger, with Post Fence and Push Stick

£149.90 £124.92 exc. tax

In stock

Upgrade or build your own POWER8workshop, add the cordless workstation with charger dock to your basket then choose which tools and POWERhandles you prefer. You’ve got the freedom to make your own kit!

In stock

SKU: CA04-CD03 Categories: ,


This product is an empty POWER8workshop PROcase and Li-Ion charger dock, for those who wish to upgrade. No tools or bag included, these are available to purchase separately.

Please note – the PROcase is not compatible with the WS1-CS01 140mm Circular Saw however all other tools from older versions of the POWER8workshop are fully compatible.

The ideal tool set for professional tradesmen and DIY enthusiasts; the POWER8workshop allows you to work whenever and wherever you are. At only 525 x 365 x 225mm (LxWxH) it is the most portable workstation available and can be used remotely from a mains outlet.

Clever use of the Cast machined aluminium armoured case and spirit level allow the 18v Lithium Ion (Li-Ion) cordless tools to transform into their bench top equivalent, with neither quality nor power compromised by extra functionality. The fast charger is built into the case so there is no need to unpack anything to start charging the battery; there’s also a secondary charger point (SCP) so that you can charge a battery at the same time as using another to power the benchtop functions.

The CEL PROcase has a lid which is a single piece of cast then machined aluminium with a stainless steel insert near the saw blades. The locking mechanism has been beefed up to take the huge torque of the PROsaw. It also allows the Jigsaw and other future additions to lock in the same way as before. Combined with the PROsaw this case becomes an excellent table saw with features normally only seen on big table saws.

Combine the HAMMERdrill head with the PROcase and Post/Fence to create an excellent portable drill press/pillar drill.

This case includes a charger for Lithium Ion, Ni-CD and NiMH POWERhandles.
Time to charge from flat: Li-Ion 80% in 30 mins 100% in 60 mins (Charge time varies depending on capacity and charge state)
The charger plugs directly into a mains outlet and allows a second POWERhandle to be charged while the case tools are in use.

Functions/Common uses

  • General woodworking
  • Construction
  • Ripping planks
  • Creating joints
  • Drilling any material with the appropriate bit fitted

Whats in the Box?

  • CEL PROcase with Machined Aluminium work surface and 110-240V 2A Fast Charger, containing:
  • 1x CD03 built-in charging dock
  • 1x CA04 Case with Aluminium benchtop
  • 1x PF02 post/fence
  • 1x PL01 push lever

Compatible with all CEL POWERhandles/battery types, however the CS2 Circular Saw Head requires the use of a 3.0Ah POWERhandle or above.

Additional information

Weight 12 kg
Dimensions 60 × 45 × 32 cm
Power Source

, , ,

Tool Type

, , ,

You may also like…

Go to Top