Build your own POWER8workshop – 18V Li-Ion

£5.75£124.92 £5.75 exc. tax

In stock

Add the cordless workstation with charger dock to your basket then choose which tools and POWERhandles you prefer. You’ve got the freedom to make your own kit!

£124.92 £124.92 exc. tax

In stock

£14.58 £14.58 exc. tax

Only 1 left in stock

£119.08 £91.58 £91.58 exc. tax

Only 3 left in stock

£33.25 £33.25 exc. tax

In stock

£29.92 £29.92 exc. tax

In stock

£45.75 £45.75 exc. tax

Only 4 left in stock

£8.25 £8.25 exc. tax

In stock

Select options£51.58£74.92

In stock

Read more£12.91 £12.91 exc. tax

Out of stock

Select options£7.08

In stock

£5.75 £5.75 exc. tax

In stock

£5.75 £5.75 exc. tax

In stock

£29.08 £29.08 exc. tax

In stock

SKU: CA04-CD03-group Categories: ,

Description

The description below describes the full POWER8workshop PRO (WS4P), however if you don’t need the full kit you can buy the components separately here.

The ideal tool set for professional tradesmen and DIY enthusiasts; the POWER8workshop allows you to work whenever and wherever you are. At only 525 x 365 x 225mm (LxWxH) it is the most portable workstation available and can be used remotely from a mains outlet.

Clever use of the Cast machined aluminium armoured case and spirit level allow the 18v Lithium Ion (Li-Ion) cordless tools to transform into their bench top equivalent, with neither quality nor power compromised by extra functionality. Everything packs into an incredibly small padded nylon bag (NB02*) which fits inside the case, making the product compact and portable. The fast charger is built into the case so there is no need to unpack anything to start charging the battery; there’s also a secondary charger point (SCP) so that you can charge a battery at the same time as using another to power the benchtop functions.

The CEL PROcase (CA04-CD03)* has a lid which is a single piece of cast then machined aluminium with a stainless steel insert near the saw blades. The locking mechanism has been beefed up to take the huge torque of the PROsaw (CS2*). It also allows the Jigsaw (JS02*) and other future additions to lock in the same way as before. Large diameter 165mm saw blades allow over 2″ depth cut and more efficient ripping. The ultra-powerful Mabuchi motor combined with a Li-Ion POWERhandle PRO (PH41*) provides the torque and cutting time to take on jobs that would normally require an AC saw. Combined with the PROcase this saw becomes an excellent table saw with features normally only seen on big table saws.

A cordless hammer drill/driver head from the POWER8 range (HD02*) is extremely powerful and great for any job including drilling concrete and masonry. 20 torque settings, 2 speed gearbox, single collar all metal ratcheting chuck 1-13mm, hammer action, 2 double ended driver bits, replaceable motor brushes, spindle lock, electronic brake. Combine with the PROcase and Post/Fence to create an excellent portable drill press/pillar drill.

The PH41 18V 4000mAh CEL POWERhandle PRO 4.0* has been developed to give CEL PRO Tools the power to perform the toughest jobs. High current output and Samsung Li-Ion cells allows this POWERhandle to run any compatible tool at its maximum.

*Add to the basket to purchase

This set includes a charger for Lithium Ion, Ni-CD and NiMH POWERhandles.
Time to charge from flat: Li-Ion 80% in 30 mins 100% in 60 mins (Charge time varies depending on capacity and charge state)
The charger plugs directly into a mains outlet and allows a second POWERhandle to be charged while the case tools are in use.

Functions/Common uses

  • General woodworking
  • Construction
  • Ripping planks
  • Creating joints
  • Drilling any material with the appropriate bit fitted

Compatible with all CEL POWERhandles/battery types, however the CS2 Circular Saw Head requires the use of a 3.0Ah POWERhandle or above.

Please note – this case is not compatible with the WS1-CS01 140mm Circular Saw however all other tools from older versions of the POWER8workshop are fully compatible.

If you wish to run the POWER8workshop directly from the mains (AC) please see POWERhandle AC (PHAC-230)

Additional information

Weight 17 kg
Dimensions 60 × 45 × 32 cm
Power Source

, , ,

Tool Type

, , ,

Documents

Additional documents related to this product, click to open as pdf file:

Case CA04_MANUAL for tools used inside case, includes charger

Battery PH41&PH15_POWERHANDLE_MANUAL

Battery PH12 POWERHANDLE MANUAL

Circular Saw CS2 MANUAL

Jigsaw JS02 MANUAL

Drill HD01_LD01_MANUAL

 

 

 

You may also like…