14.4V Impact Driver – Bare/naked

Description

The 144ID Impact Driver provides 90Nm of torque and is much more efficient at driving/removing screws and threaded fixings than a rotary drill. Because of this you will see greatly increased battery performance when driving screws and they will go in faster and tighter than you can believe. The 144ID Impact Driver also has a variable trigger and electric brake.  A light illuminates where you are working.

Why choose an Impact driver over a drill?
* Impact drivers create much higher torque than a drill with the same body weight.
* The battery will last longer than when using a drill doing the same work.
* The Impact Driver can remove cross-threaded and damaged screw heads with ease, whereas a drill cannot.
* Less torque is transmitted to the user – you will not have to hold the Impact Driver so tight.
* The Impact Driver has extremely high power to weight ratio.
* 2 stage driving system – when the torque required is low the action is fast; when more effort is needed the Impact Driver uses the rotary hammer.

Functions/Common uses:

• With the appropriate attachment: driving or removing screws and fixings; drilling holes

Whats in the Box?

• 144ID Impact Driver

Motor Type:

• Hongyang #550

Rated Voltage:

• 14.4V

Maximum Torque:

• 90Nm

Running Gear:

• Metal & Impact

Impact/Hammer Rate:

• 0-3300IPM

No Load Speed:

• 0-2400RPM

Torque Settings:

• N/A

Chuck Type Capacity:

• 1/4″ Hex

Drilling Capacity:

• Steel: 10mm (3/8″); Wood: 13mm (1/2″); Masonry: 10mm (3/8″)

 

Supplied without a battery or charger to give even more savings and greater choice.

Compatible with the 144BP15 14.4V Li-Ion battery & 144FC Fast Charger.