https://sketchfab.com/cel/folders/eb19b17433ef4c5484057025d07fab61
Another CEL designed pebble watch strap printable on the Robox. Some Assembly Required!
Recommended settings;
Resolution: Normal or Fine
Infill: 10%
Material: ABS
We recommend 94 links to start with. Your watch strap may require more or less links depending on the size of your wrist. You will always need 1 x link latch and 8 x link blanks. The original spring pins from the Pebble were used to connect the straps to the watch itself. The links are held together with ABS filament fed through them. We recommend using 2mm bar for the part the latch clips on too.
