Timelapse, what am ...
 
Notifications
Clear all

Timelapse, what am I missing?

Andy from Workshopshed
(@workshopshed)
Eminent Member

Got my camera attached to the root.

Can see the pictures in Automaker.

Ticked the box for "timelapse"

Using the default camera profile.

But I can't see any results.

Where does it store the video or stills? Is that on the Root or my host Windows PC?

 

1619357898-Automaker.png
Quote
Topic starter Posted : 25th April 2021 2:38 pm
Topic Tags
Steffen-Berlin
(@steffen-berlin)
Eminent Member

Hi!

https://cel-robox.com/root#timelapse

"...If a USB memory stick is connected to the Root, the images will be stored in a folder /$PRINTER_NAME/$JOB_ID where $PRINTER_NAME is the name assigned to the printer, and $JOB_ID is a unique id generated for the print job. If a usb memory stick is not connected, the images will be stored on the Root itself in “/home/pi/CEL Root/time lapse/$PRINTER_NAME/$JOB_ID”. ... "

 

Greetings

ReplyQuote
Posted : 26th April 2021 11:41 am
Share:

This community page and the content inside is publicly visible except in restricted groups. A registered community member is able to post content. Because of the open nature of this forum the content posted may not represent the views of CEL. While we do regularly read the content posted, in some cases the content may not be appropriate for the reader or may cause offence. Please help us by reporting such content. Technical advice provided in this forum may be provided with good intention and a belief that is is correct but may not be applicable to all hardware, software or user ability. In some cases content may not be relevant to newer or older revisions, conflicting or incorrect advice may be contained within conversations, community moderators will attempt to add to this or make corrections but to preserve the thread this may be on following pages or be missed as the forum evolves.

For official advice users should contact the CEL support team via www.cel-robox.com/support/ and follow the provided advice to preserve safety, warranty and function of Robox hardware or software.
This applies to any use or alteration which is not specifically described in the officially supplied guides from CEL. Community content should not be considered official even where posted by CEL employees. Only advice provided via the CEL support portal should be considered official.
Robox is a complex machine with many potential uses, to help preserve the good working order of both hardware and software please be patient and note that many common fixes for other 3D printers do not apply to Robox and may cause irreversible damage or compromise safe operation.
Images and content placed on this forum may be used by CEL and in related media without reward or attribution.