Details
The 144DR Compact Drill/Driver has enough torque to do jobs that would normally need a much bigger drill, switch to high speed for smaller drill bits and fast cutting. It looks and feels small but this drill is perfect for most drilling requirements.
With an LED worklight for dark corners and variable trigger for smooth control and easy alignment. 10mm capacity easy lock keyless chuck with Electronic brake. Comfortable grip - balanced and ergonomic for all day use.
The 144ID Impact Driver provides 90Nm of torque and is much more efficient at driving/removing screws and threaded fixings than a rotary drill. Because of this you will see greatly increased battery performance when driving screws and they will go in faster and tighter than you can believe. The 144ID Impact Driver also has a variable trigger and electric brake. A light illuminates where you are working.
Why choose an Impact driver over a drill?
* Impact drivers create much higher torque than a drill with the same body weight.
* The battery will last longer than when using a drill doing the same work.
* The Impact Driver can remove cross-threaded and damaged screw heads with ease, whereas a drill cannot.
* Less torque is transmitted to the user - you will not have to hold the Impact Driver so tight.
* The Impact Driver has extremely high power to weight ratio.
* 2 stage driving system - when the torque required is low the action is fast; when more effort is needed the Impact Driver uses the rotary hammer.
Supplied with a heavy duty canvas bag, 2x 144BP15 14.4V 1500mAh Li-Ion batteries and a 1 hour charger. The bag ensures you can keep everything in one place, all ready for your next job. With this comprehensive set of tools you will be able to complete most DIY jobs with ease.
Compatible with all of the the CEL 144 14.4V Li-Ion range
| CEL | 144ID Impact Driver |
|---|---|
| Product Code | 144ID |
| CEL category | 144 |
| Weight in use (kg) | 1.15 |
| Weight for shipping (kg) | 0.9 |
| Functions/Common uses | With the appropriate attachment: Driving or removing screws and fixings Drilling holes |
| Motor Type | Hongyang #550 |
| Rated Voltage | 14.4V |
| Maximum Torque | 90Nm |
| Running Gear | Metal & Impact |
| Impact/Hammer Rate | 0-3300IPM |
| No Load Speed | 0-2400RPM |
| Torque Settings | N/A |
| Chuck Type Capacity | 1/4" Hex |
| Drilling Capacity: | Steel: 10mm (3/8"); Wood: 13mm (1/2"); Masonry: 10mm (3/8") |
| Feature | Powerful |
| CEL | 144DR 2 Speed Drill/Driver |
| Product Code | 144DR |
| CEL category | 144 |
| Weight in use (kg) | 1.15 |
| Weight for shipping (kg) | 0.9 |
| Functions/Common uses | High or low speed drilling Driving or removing screws Reaming Sanding Grinding Shaping Making holes to allow the use of a jigsaw or other tool to gain access Winding or twisting |
| Motor Type | Jinmazhi #725 |
| Rated Voltage | 14.4V |
| Maximum Torque | 15Nm |
| Running Gear | 2 Speed |
| Impact/Hammer Rate | N/A |
| No Load Speed | Low 0 - 350RPM High 0-1000RPM |
| Torque Settings | 19+1 |
| Chuck Type Capacity | 3 Jaw 10mm (3/8") |
| Drilling Capacity: | Steel: 13mm (1/2"); Wood: 28mm (1.1"); Masonry: 10mm (3/8") |
| Feature | Compact |
You may also be interested in the following product(s)
Accessory Case Pack 4 AP04
£10.49
|
Accessory Case Pack 1 WS1-AP01
£10.49
|
Check items to add to the cart or select all
You have no items to compare.
You have no items in your shopping cart.
