Details
The 144DR Compact Drill/Driver has enough torque to do jobs that would normally need a much bigger drill, switch to high speed for smaller drill bits and fast cutting. It looks and feels small but this drill is perfect for most drilling requirements.
With an LED worklight for dark corners and variable trigger for smooth control and easy alignment. 10mm capacity easy lock keyless chuck with Electronic brake. Comfortable grip - balanced and ergonomic for all day use.
The 144ID Impact Driver provides 90Nm of torque and is much more efficient at driving/removing screws and threaded fixings than a rotary drill. Because of this you will see greatly increased battery performance when driving screws and they will go in faster and tighter than you can believe. The 144ID Impact Driver also has a variable trigger and electric brake. A light illuminates where you are working.
Why choose an Impact driver over a drill?
* Impact drivers create much higher torque than a drill with the same body weight.
* The battery will last longer than when using a drill doing the same work.
* The Impact Driver can remove cross-threaded and damaged screw heads with ease, whereas a drill cannot.
* Less torque is transmitted to the user - you will not have to hold the Impact Driver so tight.
* The Impact Driver has extremely high power to weight ratio.
* 2 stage driving system - when the torque required is low the action is fast; when more effort is needed the Impact Driver uses the rotary hammer.
The 144MT Cordless Multi-tool is the master of difficult jobs. With a weight of 1.0kg and ergonomic features the 144MT Multi-tool is so versatile. It can easily cut through most materials including metal pipes and tiles; sand wood, concrete and masonry; remove tiling grout, vinyl floor and glued down carpet; repair old windows and sealant around sinks/baths.
The 144MT Multi-tool oscillates at 14500/min to ensure high speed cutting and has an oscillation angle of 2.8 degrees. Reach those tight corners that were difficult before.
CEL OIS blades and attachments are readily available to purchase in Accessory Pack form, or singular.
Supplied with a heavy duty canvas bag, 2x 144BP15 14.4V 1500mAh Li-Ion batteries, a 1 hour charger and AP08 Multi-tool Cutting Pack. The bag ensures you can keep everything in one place, all ready for your next job. With these 3 tools you will be able to complete most DIY jobs with ease.
Compatible with all of the the CEL 144 14.4V Li-Ion range
| CEL | 144ID Impact Driver |
|---|---|
| Product Code | 144ID |
| CEL category | 144 |
| Weight in use (kg) | 1.15 |
| Weight for shipping (kg) | 0.9 |
| Functions/Common uses | With the appropriate attachment: Driving or removing screws and fixings Drilling holes |
| Motor Type | Hongyang #550 |
| Rated Voltage | 14.4V |
| Maximum Torque | 90Nm |
| Running Gear | Metal & Impact |
| Impact/Hammer Rate | 0-3300IPM |
| No Load Speed | 0-2400RPM |
| Torque Settings | N/A |
| Chuck Type Capacity | 1/4" Hex |
| Drilling Capacity: | Steel: 10mm (3/8"); Wood: 13mm (1/2"); Masonry: 10mm (3/8") |
| Feature | Powerful |
| CEL | 144DR 2 Speed Drill/Driver |
| Product Code | 144DR |
| CEL category | 144 |
| Weight in use (kg) | 1.15 |
| Weight for shipping (kg) | 0.9 |
| Functions/Common uses | High or low speed drilling Driving or removing screws Reaming Sanding Grinding Shaping Making holes to allow the use of a jigsaw or other tool to gain access Winding or twisting |
| Motor Type | Jinmazhi #725 |
| Rated Voltage | 14.4V |
| Maximum Torque | 15Nm |
| Running Gear | 2 Speed |
| Impact/Hammer Rate | N/A |
| No Load Speed | Low 0 - 350RPM High 0-1000RPM |
| Torque Settings | 19+1 |
| Chuck Type Capacity | 3 Jaw 10mm (3/8") |
| Drilling Capacity: | Steel: 13mm (1/2"); Wood: 28mm (1.1"); Masonry: 10mm (3/8") |
| Feature | Compact |
| Whats in the Box? | 144DR 2 Speed Drill/Driver 6x Drill bits: 1.5, 2.5, 3, 4, 5, 6mm PZ1, PZ2 PH1, PH2 2x VSL 6 |
| CEL | 144MT Multi-tool |
| Product Code | 144MT |
| CEL category | 144 |
| Weight in use (kg) | 1.02 |
| Weight for shipping (kg) | 0.85 |
| Functions/Common uses | Cutting Electrical outlets Hinges & locks Joints Recesses Sculpting Fixing Door lengths Flush Cutting Copper pipe PVC pipe Skirting boards Wood dowels Wall plugs Nails Installing New Door Casing A Floor Vent Sanding or Grinding Furniture, In confined spaces Removing Broken floor tiles Glued down carpets Tile grout Old caulk Vinyl flooring Repairing Sealant around showers sinks and bathtubs Old windows |
| Motor Type | Hongyang #550 |
| Rated Voltage | 14.4V |
| Running Gear | Metal |
| No Load Speed | 14500RPM |
| Stroke/Oscillation | 2.8° |
| Accessory Fitting | CEL OIS |
| Feature | Infinite Uses |
You may also be interested in the following product(s)
AP09 Oscillating Multi-Tool Sanding and Grinding PackRegular Price: £19.90 Special Price £14.90 |
Accessory Case Pack 4 AP04
£10.49
|
AP08 Oscillating Multi-tool Cutting PackRegular Price: £21.90 Special Price £11.90 |
Check items to add to the cart or select all
You have no items to compare.
You have no items in your shopping cart.
