MODIFI3D: 3D print finishing tool

Be the first to review this product

Availability: In stock.

Quantity Available: 16

Available from:


or check out instantly with:

Checkout with PayPal


Quick Overview

Heated 3D tool with specially coated interchangeable tips designed to FINISH, REPAIR and MODIFY 3D printed parts.

MODIFI3D: 3D print finishing tool

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


CELMODIFI3D : Print Finishing Tool
Product Code MOD-3D
CEL category CEL Robox®
Weight for shipping (kg) 0.1
Product Name MODIFI3D : Print Finishing Tool

3D printers are fantastic things! Producing some great looking parts straight off the printer. However, if you actually own a desktop 3D printer you will know that this isn't always the case and all kinds of printing errors can creep in. Removing support material can sometimes be a pain and what if you need to modify the part after printing? You won't want to print the whole thing again if it can be avoided!...

This is where the MODIFI3D Finishing Tool steps in. MODIFI3D is a heated tool with specially coated interchangeable tips designed to finish, repair and modify 3D printed parts. MODIFI3D Is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints. 

The pen like form of MODIFI3D makes it very comfortable to use and extremely easy to control when precision is important. MODIFI3D works with PLA, ABS and other 3D printing materials.

  • 4 interchangeable tips -
  • Needle, knife, scoop and point tips.
  • Special tip coating to prevent sticking.
  • Rapid heat up in less than 15 seconds.
  • Sleep mode if not used for 25 seconds.
  • Lightweight, compact and easy to use.
  • Touch switch and indicator light.
  • USB powered (USB 2.0 or USB 3.0).
  • Basic stand included.

In less than 15 seconds MODIFI3D will reach around 300ºC (572ºF) and is ready for use. To increase the temperature or reach the maximum of 420-450ºC (788-842ºF) continue to touch the metal switch until the required temperature is reached.

If MODIFI3D is not used for 25 seconds it will go into sleep mode (light will go out and the tip will start to cool). To wake MODIFI3D just gently touch the switch and the heating process will continue.

Further information can be found on the MODIFI3D website:

Functions/Common uses

Cleaning up a 3D print

Whats in the Box?

MODIFI3D Print Finishing Tool
1 x USB cable (compatible with USB 2.0 or USB 3.0)
4 interchangeable tips - Needle, knife, scoop and point
Basic Stand


5V 8W
USB 2.0 or USB 3.0 recommended
Size: 15mm (0.6") x 117mm (4.6") excluding tips
Weight: 120g (4.3 oz)
Cable: 1.5m (59") long to USB A plug
Heats up to 300ºC (572ºF) in less than 15 seconds.
Maximum temperature of 420-450ºC (788-842ºF)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.