144ID Impact Driver - Bare/Naked

Be the first to review this product

Availability: In stock.

Regular Price: £40.49

Special Price £29.90

or check out instantly with:

Checkout with PayPal


  • OR

    Quick Overview

    Lightweight but more efficient than a rotary drill at driving/removing screws, therefore better battery performance.

    144ID Impact Driver - Bare/Naked

    Double click on above image to view full picture

    Zoom Out
    Zoom In

    More Views


    The 144ID Impact Driver provides 90Nm of torque and is much more efficient at driving/removing screws and threaded fixings than a rotary drill. Because of this you will see greatly increased battery performance when driving screws and they will go in faster and tighter than you can believe. The 144ID Impact Driver also has a variable trigger and electric brake.  A light illuminates where you are working.

    Why choose an Impact driver over a drill?
    * Impact drivers create much higher torque than a drill with the same body weight.
    * The battery will last longer than when using a drill doing the same work.
    * The Impact Driver can remove cross-threaded and damaged screw heads with ease, whereas a drill cannot.
    * Less torque is transmitted to the user - you will not have to hold the Impact Driver so tight.
    * The Impact Driver has extremely high power to weight ratio.
    * 2 stage driving system - when the torque required is low the action is fast; when more effort is needed the Impact Driver uses the rotary hammer.

    Supplied without a battery or charger to give even more savings and greater choice.
    Compatible with the 144BP15 14.4V Li-Ion battery, 144RC Regular Charger & 144FC Fast Charger.

    CEL144ID Impact Driver
    Product Code 144ID
    CEL category 144
    Weight in use (kg) 1.15
    Weight for shipping (kg) 0.9
    Product Name 144ID Impact Driver
    Functions/Common uses With the appropriate attachment:
    Driving or removing screws and fixings
    Drilling holes
    Whats in the Box? 144ID Impact Driver
    Motor Type Hongyang #550
    Rated Voltage 14.4V
    Maximum Torque 90Nm
    Running Gear Metal & Impact
    Impact/Hammer Rate 0-3300IPM
    No Load Speed 0-2400RPM
    Torque Settings N/A
    Chuck Type Capacity 1/4" Hex
    Drilling Capacity: Steel: 10mm (3/8"); Wood: 13mm (1/2"); Masonry: 10mm (3/8")
    Feature Powerful

    All the right tools for the job, one battery. The extensive CEL 14.4V range

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.