144 Multi-tool, Impact Driver & 2 speed Drill Combo Kit - 144-BD1

Be the first to review this product

Availability: In stock.


or check out instantly with:

Checkout with PayPal


Quick Overview

3 great tools from the 14.4V Li-Ion range, supplied in a heavy duty tool bag, with 2x 1500mAh batteries plus various accessories.

144 Multi-tool, Impact Driver & 2 speed Drill Combo Kit - 144-BD1

Double click on above image to view full picture

Zoom Out
Zoom In


The 144DR Compact Drill/Driver has enough torque to do jobs that would normally need a much bigger drill, switch to high speed for smaller drill bits and fast cutting. It looks and feels small but this drill is perfect for most drilling requirements.

With an LED worklight for dark corners and variable trigger for smooth control and easy alignment. 10mm capacity easy lock keyless chuck with Electronic brake. Comfortable grip - balanced and ergonomic for all day use.

The 144ID Impact Driver provides 90Nm of torque and is much more efficient at driving/removing screws and threaded fixings than a rotary drill. Because of this you will see greatly increased battery performance when driving screws and they will go in faster and tighter than you can believe. The 144ID Impact Driver also has a variable trigger and electric brake. A light illuminates where you are working.

Why choose an Impact driver over a drill?
* Impact drivers create much higher torque than a drill with the same body weight.
* The battery will last longer than when using a drill doing the same work.
* The Impact Driver can remove cross-threaded and damaged screw heads with ease, whereas a drill cannot.
* Less torque is transmitted to the user - you will not have to hold the Impact Driver so tight.
* The Impact Driver has extremely high power to weight ratio.
* 2 stage driving system - when the torque required is low the action is fast; when more effort is needed the Impact Driver uses the rotary hammer.

The 144MT Cordless Multi-tool is the master of difficult jobs. With a weight of 1.0kg and ergonomic features the 144MT Multi-tool is so versatile. It can easily cut through most materials including metal pipes and tiles; sand wood, concrete and masonry; remove tiling grout, vinyl floor and glued down carpet; repair old windows and sealant around sinks/baths.

The 144MT Multi-tool oscillates at 14500/min to ensure high speed cutting and has an oscillation angle of 2.8 degrees. Reach those tight corners that were difficult before.

CEL OIS blades and attachments are readily available to purchase in Accessory Pack form, or singular.

Supplied with a heavy duty canvas bag, 2x 144BP15 14.4V 1500mAh Li-Ion batteries, a 1 hour charger and AP08 Multi-tool Cutting Pack. The bag ensures you can keep everything in one place, all ready for your next job. With these 3 tools you will be able to complete most DIY jobs with ease.

Compatible with all of the the CEL 144 14.4V Li-Ion range

CEL144ID Impact Driver
Product Code 144ID
CEL category 144
Weight in use (kg) 1.15
Weight for shipping (kg) 0.9
Functions/Common uses With the appropriate attachment:
Driving or removing screws and fixings
Drilling holes
Motor Type Hongyang #550
Rated Voltage 14.4V
Maximum Torque 90Nm
Running Gear Metal & Impact
Impact/Hammer Rate 0-3300IPM
No Load Speed 0-2400RPM
Torque Settings N/A
Chuck Type Capacity 1/4" Hex
Drilling Capacity: Steel: 10mm (3/8"); Wood: 13mm (1/2"); Masonry: 10mm (3/8")
Feature Powerful
CEL144DR 2 Speed Drill/Driver
Product Code 144DR
CEL category 144
Weight in use (kg) 1.15
Weight for shipping (kg) 0.9
Functions/Common uses High or low speed drilling
Driving or removing screws
Making holes to allow the use of a jigsaw or other tool to gain access
Winding or twisting
Motor Type Jinmazhi #725
Rated Voltage 14.4V
Maximum Torque 15Nm
Running Gear 2 Speed
Impact/Hammer Rate N/A
No Load Speed Low 0 - 350RPM High 0-1000RPM
Torque Settings 19+1
Chuck Type Capacity 3 Jaw 10mm (3/8")
Drilling Capacity: Steel: 13mm (1/2"); Wood: 28mm (1.1"); Masonry: 10mm (3/8")
Feature Compact
Whats in the Box? 144DR 2 Speed Drill/Driver
6x Drill bits: 1.5, 2.5, 3, 4, 5, 6mm
PZ1, PZ2
PH1, PH2
2x VSL 6
CEL144MT Multi-tool
Product Code 144MT
CEL category 144
Weight in use (kg) 1.02
Weight for shipping (kg) 0.85
Functions/Common uses Cutting
    Electrical outlets
    Hinges & locks
    Fixing Door lengths

Flush Cutting
    Copper pipe
    PVC pipe
    Skirting boards
    Wood dowels
    Wall plugs

    New Door Casing
    A Floor Vent

Sanding or Grinding
    Furniture, In confined spaces

    Broken floor tiles
    Glued down carpets
    Tile grout
    Old caulk
    Vinyl flooring

    Sealant around showers
    sinks and bathtubs
    Old windows
Motor Type Hongyang #550
Rated Voltage 14.4V
Running Gear Metal
No Load Speed 14500RPM
Stroke/Oscillation 2.8°
Accessory Fitting CEL OIS
Feature Infinite Uses

You may also be interested in the following product(s)

Accessory Case Pack 4 AP04

Accessory Case Pack 4 AP04

AP08 Oscillating Multi-tool Cutting Pack

AP08 Oscillating Multi-tool Cutting Pack

AP09 Oscillating Multi-Tool Sanding and Grinding Pack

AP09 Oscillating Multi-Tool Sanding and Grinding Pack


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.